When your excavator’s windscreen cracks, every hour off-site costs you money. Albion Park Rail Windscreens & Plastics delivers fast, reliable excavator glass windscreen replacements across Wollongong, Shellharbour, Kiama, Nowra and the wider Illawarra region. Since 1995, local operators, fleet managers and hire companies have trusted our team to get damaged machines safe, compliant and back to work — often the same day. From a single excavator to an entire fleet, we supply and fit quality glass built to handle tough Australian worksites.
Why Choose a Specialist for Machinery Glass Replacement?
Machinery glass replacement is nothing like standard automotive glazing. Earthmoving cabins use thicker laminated and toughened safety glass, rubber-channel or bonded fitments, and panels that must withstand constant vibration, dust and impact. An inexperienced installer risks leaks, stress cracks and safety non-compliance. Our glaziers work on machinery glass daily, so we cut, source and fit the correct glass the first time — protecting your operators and keeping your equipment within WHS requirements.
Plant Machinery Glass Replacement for All Equipment Types
Our plant machinery glass replacement service covers far more than excavators. We replace front, side, rear, door and roof glass on:
- Excavators, diggers and skid steers
- Loaders, graders, dozers and rollers
- Backhoes, telehandlers and forklifts
- Tractors, harvesters and agricultural machinery
- Cranes, bobcats and other earthmoving equipment
Whatever the make or model — Caterpillar, Komatsu, Hitachi, Kubota, Bobcat, John Deere and more — we can source or custom-cut the right glass to suit your machine.
Heavy Equipment Windshield Replacement — On-Site or In-Workshop
We know you can’t always bring a 20-tonne machine to us, so we bring the workshop to you. Our mobile team performs heavy equipment windshield replacement on-site — at construction sites, farms, quarries and depots throughout the Illawarra and South Coast. Prefer a controlled environment? Visit our fully equipped Oak Flats workshop at Unit 1/120 Industrial Rd. Either way, you get quality safety glass, professional fitment and minimal downtime for your machinery.
Get Your Machine Back to Work Today
Don’t let a cracked cabin window hold up your project or put your operator at risk. Call Albion Park Rail Windscreens & Plastics on 0417 683 903 for a fast, obligation-free quote on excavator glass windscreen replacements anywhere in the Illawarra. Emergency service available — one call and we’ll have you back on the job.
Excavator & Machinery Glass Replacement FAQs
Do I need to move my excavator to a workshop, or can the glass be fixed where it sits?
No — the mobile team can replace cabin glass on-site at construction sites, farms, quarries and depots, so a 20-tonne machine doesn't need to be transported anywhere. If you'd rather have the work done in a controlled environment, the Oak Flats workshop is also available, but on-site is the standard option for most jobs.
Call to arrange an on-site visit for your machine.
Can you source glass for an older or discontinued excavator model?
Yes — if the original glass is no longer available, laminated or toughened safety glass can be custom-cut to suit older and rarer plant machinery, rather than the job stalling because a part number doesn't exist anymore. This applies across the machinery brands and models the team already works with regularly.
Call with your machine's make and model to check options.
What's the difference between laminated and toughened glass, and does it matter for my machine?
Laminated glass holds together in a cracked, web-like pattern when damaged, keeping some visibility intact, while toughened glass shatters into small, blunt granules for safety. Which one suits your cabin depends on the panel — windscreens are typically laminated for visibility during a crack, while side or rear panels are often toughened, so it's worth confirming which applies to your specific damage.
Will the replacement glass hold up to vibration and dust on an active worksite?
Machinery glass is fitted specifically to handle the constant vibration, dust and impact of earthmoving work, using the correct glass type and fitment method for each machine rather than a standard automotive approach. Getting this right the first time matters, since a poor fit is more likely to develop leaks or stress cracks under those tougher conditions.
Can you replace glass on a machine that's still under a hire or lease agreement?
It's worth mentioning this when you call, since hire and lease equipment is common across earthmoving fleets and the team regularly works with hire companies and fleet managers. Any specific requirements from the hire agreement — like approved suppliers or documentation — can be discussed upfront so the job goes ahead smoothly.
Mention your hire or lease arrangement when you call.
Do you replace side and roof glass on cabins, or only the front windscreen?
All cabin glass is covered — front, side, rear, door and roof — not just the main windscreen. Whichever panel on your machine has cracked or been damaged, it's worth calling to get it assessed rather than assuming only front glass is serviced.
How much notice do you need to attend an active job site or quarry?
Same-day service is available for most jobs, but attending an active site can involve extra steps like sign-in procedures or a safety induction, so it's worth calling as early as possible with your site's specific requirements. Giving as much notice as you can about access arrangements helps avoid delays once the technician arrives.
Call ahead with your site's access details.
Can the glass be replaced while my operator keeps working on other tasks nearby?
It's best to check this when you book, since it depends on the machine, the location of the damage, and how close other work is happening on-site. In many cases the surrounding job can continue nearby, but the machine itself will need to be out of use for the glass replacement.
Will a rubber-channel fitment be replaced differently to a bonded one?
Yes — older machines often use a rubber-channel fitment where the glass sits in a rubber seal, while newer cabins commonly use a bonded (glued) fitment similar to a vehicle windscreen. The correct method for your machine's fitment type is used automatically as part of a proper machinery glass job, so it's not something you need to specify yourself.
Do you carry glass in stock, or does it need to be ordered in for most machines?
It depends on the machine — common brands and models are more likely to have glass on hand, which supports the same-day service offered for most jobs, while less common or older equipment may need glass sourced or custom-cut first. Calling with your machine's make and model gives the clearest answer on timing for your specific job.
Call with your machine's details to check availability.
Can you replace glass across an entire fleet at once, not just a single machine?
Yes — fleet managers and hire companies are regularly serviced from a single excavator up to entire fleets, so multi-machine jobs are a normal part of the work, not an exception. Getting in touch to discuss the scope of your fleet's needs is the best way to arrange scheduling that suits your operation.
Call to discuss fleet servicing for your operation.
Will your technicians be safe to work around an operating excavator or crane on-site?
Technicians who regularly work on active construction sites, farms and quarries are used to following the site's own access and safety procedures, including sign-in and induction requirements where these apply. If your site has specific rules or an induction process, letting the team know in advance means everything is in place before the technician arrives.
Share your site's induction or access requirements when you book.
Is there anything I need to do to prepare the machine before the technician arrives?
Having the machine positioned somewhere accessible, with power available if needed and any site access sorted in advance, helps the job start without delay. Beyond that, just be ready to point out exactly which panel is damaged so the right glass and fitment approach can be confirmed on arrival.
Can you replace agricultural machinery glass, like on a tractor or harvester, not just construction equipment?
Yes — tractors, harvesters and other agricultural machinery are covered alongside excavators and construction equipment, using the same on-site mobile service. If you're a farm operator, it's worth calling even though the service is often framed around construction sites, since the coverage extends to farm equipment too.
Call to check coverage for your farm equipment.
What happens if the new glass doesn't seal properly against dust or water once fitted?
A proper machinery glass fit is done specifically to avoid leaks and stress cracks under tough site conditions, but if an issue does turn up after the job, it's best to call and flag it as soon as possible so it can be looked at. Raising a concern early, rather than waiting, gives the best chance of a straightforward fix.
Call promptly if you notice any issue after fitting.